Longer

dPOFLEX BP01

Pharmaceutical and Industrial

Peristaltic Pump

- Up to 2 Channels

Video

Overview

Biopharmaceutical peristaltic pump for pharmaceutical and industrial applications

dPOFLEX BP01 is a multi-channel peristaltic pump that can be used with various pump heads and tubings of different sizes. dPOFLEX BP01 can reach up to 17000 mL/min. System can be controlled through built-in control panel, external signal interface and communication interface.

Features & Benefits

Manual usage through built-in control panel
Control through external signal interface
Control through communication interface (RS485, TCP/IP, Profibus DP, etc.)
Clockwise (CW) and Counter-clockwise (CCW) operation
4.3 inch LCD display
FDA 21 CFR Part 11 compliance with electronic signature and audit trail
GMP compliance with IQ/OQ support
Fluid leakage sensor, open-head sensor and flow rate sensor for safer operation and predictive maintenance
Log record up to 90 days
Keypad lock function to avoid misoperation
Cast aluminum housing for high corrosive resistance
High IP rating for usage in wet and dusty environment

Technical Specifications

Housing Material	304 stainless steel
Speed	0.1-265 RPM, CW/CCW
Speed Resolution	0.1 RPM
Maximum Number of Channels	2
Display	4.3 inch LCD
Clock Function	Year/month/day/hour/minute can be set. Hours and minutes are displayed on the screen.
Work Mode	Flow rate mode, Dispensing mode, Calibration mode
Flow Rate Mode	The pump runs continuously at the set flow rate. Flow rate and pump speed are displayed on the screen.
Flow Rate Setting Range	1.1 mL/min - 17 L/min (depending on pump head and tubing)
Dispensing Mode	The pump repeats the dispensing at the set volume, cycles and interval time. Single volume, dispensed volume and dispensed cycles/target cycles are displayed on the screen.
Volume of Single Dispense	1.0 mL - 274.9 L (depending on pump head and tubing)
Dispensing Cycle	1-9999 ("0" for unlimited)
Interval Time	5-9999 sec
Calibration Function	Improves the flow rate and dispensing volume accuracy
Control Mode	Keypad control, External signal control, Communication control
Communication Control	RS485 that support Modbus RTU mode TCP/IP interface for Industrial Ethernet (optional) Profibus DP (optional)
External Control	Speed control: 0-10 V, 4-20 mA Start/stop, direction control: 5-24 V logic level signal or relay signal (dry contact)
Pump Status Output	Pump speed: 0-10 V, 4-20 mA, frequency signal (optional) Running/stopped, direction, tubing leakeage alarm: Relay signal (dry contact)
Open Head Sensor	The pump will stop when the pump head is open for enhanced user safety
Pump Status When Powered Up	Stopped
Keypad Lock Function	Locks the keypad automatically after 20 seconds standby when enabled (the start/stop key will not be locked)
Tubing Leak Detection	Detects tubing leakage and gives an alarm (optional)
Flow Rate Measurement	Measures the flow rate by connecting flow meter (optional)
User Access Control	Three levels of user access (administrator, technician, operator)
Electronic Signature & Audit Trail	Meets FDA 21 CFR Part 11 requirement
Log Record	Records 90 days operation history (records can be exported)
Support IQ/OQ	Meets GMP requirement
Certificates	CE, UKCA EN 61010-1:2010, EN IEC 61010-2-201, EMC:EN IEC61000-6-2, EN IEC 61000-6-4
Dimensions (L x W x H)	260 mm x 407 mm x 290 mm
Power Supply	AC 100-240V 50/60Hz
Operating Conditions	Temperature: 5-40°C Relative humidity: ≤100%
IP Rating	IP66
Weight	≤16.6 kg (drive only)

All or some of the specifications and features noted on this page may be optional. All necessary details in this regard may not be specified on this page. Please contact us for full details. / Product design, appeareance, functionality, features and specifications are subject to change without notice.