NE-300
Single-Channel Infusion Pump
Single-Channel Infusion Pump
New Era
NE-300
Single Channel
Syringe Pump
Overview
Low-cost Just Infusion™ syringe pump for applications in research, medicine, veterinary, manufacturing and many other areas
NE-300 is a low-cost single channel syringe pump without withdrawal, target volume, computer interface and programmability feature. NE-300 can hold plastic, glass or stainless steel syringes ranging from microliter to 140 mL in volume. The system can provide infusion rates from 0.727 μL/hr (using 1 mL syringe) to 1568 mL/hr (using 60 mL syringe). Lower (‹0.727 μL/hr) and higher (›1568 mL/hr) infusion rates are possible with smaller (‹1 mL) and bigger (›60 mL) syringes, respectively.
Features & Benefits
- Precise, reproducible flow rates
- Stand-alone use with built-in front panel
- Continuous pumping process until user stops the pump
- Compatibility with syringes up to 140 mL
- Purge (prime) mode for infusion or withdrawal at top speed
- Ability to change pumping rate while pumping
- Selectable pumping rate units (mL/hr, μL/hr, mL/min, μL/min)
- Non-volatile memory of all operating parameters
- Power failure mode to restart pumping after a power interruption
Technical Specifications
| Operating Mode | Infusion |
|---|---|
| Number of Syringe Channels | 1 |
| Syringe Size | Up to 140 mL 140 mL syringes can be partially filled. 60 mL or smaller syringes can be fully filled. |
| Syringe Inside Diameter (ID) Range | 0.1-50 mm |
| Maximum Pumping Rate | B-D 60 mL syringe: 1257 mL/hr Terumo 60 mL syringe: 1568 mL/hr Maximum pumping rate varies between brands due to differences in syringe ID. |
| Minimum Pumping Rate | B-D 1 mL syringe: 0.73 μL/hr Monoject 1 mL syringe: 1.088 μL/hr Minimum pumping rate varies between brands due to differences in syringe ID. |
| Dispensing Accuracy | ±1% |
| Reproducibility | ±0.1% |
| Maximum Force | 35 lbs at minimum speed, 18 lbs at maximum speed |
| Dimensions | 8.75 in x 5.75 in x 4.5 in (22.86 cm x 14.605 cm x 11.43 cm) |
| Weight | 3.6 lbs (1.63 kg) |
| Voltage | 12V DC at full load |
| Amperage | 750 mA at full load |
All or some of the specifications and features noted on this page may be optional. All necessary details in this regard may not be specified on this page. Please contact us for full details. / Product design, appeareance, functionality, features and specifications are subject to change without notice.
New Era Pump Systems, Inc.
Dosing Pump
Syringe Pump
RotaLab
Contact Us
+90 (212) 696 0406 | info@rotalab.com